Eyeleds International

Eyeleds recommends cleaning the fixtures with a common broom for outside. Although the stainless steel or brass encapsulations are resistant to streaks, excessive pressure (e.g. a sanding machine) can damage the fixture.

Excess cleaning materials and corrosive build up need to be removed with water. The use of aggressive detergents is strongly discouraged since these might harm the construction in the short or long term (depends on the used quantity). The application of a high pressure cleaning system is also discouraged. Besides, regular cleaning of the fixtures prevents corrosion and the development of corrosive build up.

RGB stands for Red, Green and Blue – the 3 basic or primary colors. By mixing these colors, virtually any other color can be created.

By means of mixing the primary colors red, green and blue virtually any other color can be created. An Eyeleds® ColorEYE® light unit contains an RGB diode with three different “color-chambers”. By means of simultaneously dimming one color and raising the intensity of another color, the individual light unit shows a new color.

The Eyeleds® ColorEYE® systems can be applied in many different surfaces such as tiles, natural stone, laminate, hardwood flooring, carpets and decorative gravel. Generally speaking, Eyeleds® can be installed in materials with a thickness of >7mm. Due to a minimum heat development (<=35°C) Eyeleds® is safe, irrespective of the application type.

For the present, the ColorEYE® series is designed for indoor application only. However, of course it is possible to install the lights in a greenhouse, closed verandah or summer-house.

The ColorEYE® CS is not dimmable.