Sequencer
The multi-function sequencer control unit allows for mixing the ColorEYE® Pro - Red, Green and Blue light fixtures into any light color imaginable. You can select Red, Green or Blue as your primary light color, the selected color can be dimmed by holding down the color button selected.Programming a custom color is as simple as selecting one color and then adding one or two other colors. Holding down the colors keypad, dims out the color, this allows you to create any color desired. Once you have created the desired color it can be saved so it is recalled every time the light system is turned on.
Two pre-programmed sequences (light shows) are available by pressing the Sequence 1 or Sequence 2 buttons. The speed of the sequence(s), which are pre-loaded into the sequencer, may be increased, decreased and saved, as desired.
Professional lighting designers will appreciate the ColorEYE® Pro Sequence Designer Software which includes a connection cable and a interface for the Sequencer Control Pad. The programming software & hardware allows uploading of static and dynamic sequence light scene designs.
The system is KNX/EIB-DMX compatible and is able to be integrated into advanced lighting control systems. DMX512 (Digital Multiple-X) is a communications protocol used mainly to control stage lighting, the KNX/EIB protocol is a device network that can be controlled by anything from an 8-bit micro controller, computer or computer network.
Features and instructions of the sequence control pad can be found in the instruction manual supplied with the product or may be requested in advance from Eyeleds®. Features & Benefits • Wall or Surface mount control unit (sequencer)
• Controls up to 72 Channels (there are 3 Channels per ColorEYE® Pro light)
• Includes connection cable with female IP20 plug
• Ambient temperature operating range 41 to 113º F
• Easy operation via 8 push-buttons
• For indoor use only No Datasheet is available.
